跳至主要内容

Stellite Alloy 6 Sytop

Stellite Alloy 6 stator and rotor are made of Cobalt-chromium Alloy 6 , as its great wear and corrosion resistance . different specification upon customer drawing or request .
Material choose
Grade C Mn Si Cr Ni Mo W Co Fe P S Density
(g/cm3)
Hardness
(HRC)
Cobalt-chromium Alloy 3 2.0-2.7 1.0 1.0 29-33 3.0
11-14 Bal. 3.0 ≤0.03 ≤0.03 8.55 51-55
Cobalt-chromium Alloy 6 0.9-1.4 1.0 1.5 27-31 3.0 1.5 3.5-5.5 Bal. 3.0 ≤0.03 ≤0.03 8.35 38-44
What is the Application :
These kind of rotor and stator mixer are used in Oil development and drilling equipment in oil and gas industry . as its great wear and corrosion resistance .

此博客中的热门博文

The Difference Between Cobalt Alloy And Nickel Alloy

The Difference Between Cobalt Alloy And Nickel Alloy. 1.Thermal stability One of the important reasons why cobalt alloys are used as aviation material is its excellent thermal stability. Cobalt alloys have a high melting point and thermal conductivity and less thermal expansion after heating. It can be seen from this that cobalt alloys have advantages in thermal stability. Compared with cobalt alloys, nickel alloys have a higher strength but more brittle. It is easier to be broken on occasions of impact. When the temperature rises to 800℃ (the operating temperature of some engines), nickel alloys can’t be used, while cobalt alloys retain strong. 2.Stiffness The stiffness means the ability to resist deformation. Nickel alloys have a lower stiffness than cobalt alloys in various temperature. With the temperatures above 700℃, the properties of nickel alloys are completely destroyed. 3.Oxidation resistance Cobalt Chromium Alloy has superior resistance to high-tem...

Various Grades of Stellite Alloy

As a special engineering material, Stellite Alloy has been widely used. It has excellent performance in high temperature resistance, wear resistance, cavitation resistance and corrosion resistance, but the performance of alloys of different grades is also very different. Some grades of alloys are designed for a specific purpose. When used, the grades must be carefully selected to achieve superior performance. The main properties and uses of various types of stellite alloys are summarized as follows: 1. Stellite 7, 8, 21, 37, 208, 250 and 251 Reinforced with elements such as molybdenum, nickel and niobium, these seven alloys are all low carbon alloys. Although their room temperature hardness is low, it will be improved after cooling, and it has extremely high temperature corrosion resistance, thermal shock resistance, high temperature strength and best ductility. Commonly used in gas turbine blades, brass molds and extrusion dies, Stellite 208 is specifically designed f...

Sytop Stellite Alloy (Brief Introduction and Application)

Sytop Company Is located in NO.35,xingnong Road,Shenbei District,Shenyang,China. It was established in 2002 it has been a professional Stellite Alloy manufacturer. Stellite Alloy sleeve are the advantaged products for us , we have produced more than thousands specifications and all of them are produced upon customer's drawing . Brief introduction as below : Material : Stellite –Grade 3.6.12 ,694, 20 etc. Process : Powder Metallurgy , it is short for PM and investment casting Hardness: 38-53 HRC Density : 8.4 g/cm ³ Size : Diameter 8-500mm and maxium length 700mm Properties : Wear and corrosion resistance, high temperature resistance Instructions : Drawing made upon cutomers request Usage : cooperate with other shaft and axle Tolerance control : turning or grinding surface , tolerance upon drawing Production lead time Samples 10 days , normal order 20-30 days Production capacity : 20,000pcs one month. Packag...