跳至主要内容

Stellite Alloy 12 Sytop

Stellite Alloy 12 consist of complex carbides in an alloy matrix. Their exceptional wear resistance is due mainly to the unique inherent characteristics of the hard carbide phase dispersed in a CoCr alloy matrix.
Stellite 12 Saw tips are made of Stellite alloy in grade Co12,so the following information is all about Co12.
(1). Stellite Alloy 12 could be considered an intermediate alloy .
(2). It contains a higher fraction of hard, brittle carbides than Stellite Alloy 6
(3).It has increased resistance to low angle erosion, abrasion, and severe sliding wear while stretaining reasonable impact and cavitation resistance.
(4). Stellite Alloy 12 is often used self-mated or running against.

评论

发表评论

此博客中的热门博文

The Difference Between Cobalt Alloy And Nickel Alloy

The Difference Between Cobalt Alloy And Nickel Alloy. 1.Thermal stability One of the important reasons why cobalt alloys are used as aviation material is its excellent thermal stability. Cobalt alloys have a high melting point and thermal conductivity and less thermal expansion after heating. It can be seen from this that cobalt alloys have advantages in thermal stability. Compared with cobalt alloys, nickel alloys have a higher strength but more brittle. It is easier to be broken on occasions of impact. When the temperature rises to 800℃ (the operating temperature of some engines), nickel alloys can’t be used, while cobalt alloys retain strong. 2.Stiffness The stiffness means the ability to resist deformation. Nickel alloys have a lower stiffness than cobalt alloys in various temperature. With the temperatures above 700℃, the properties of nickel alloys are completely destroyed. 3.Oxidation resistance Cobalt Chromium Alloy has superior resistance to high-tem...
发表评论
阅读全文

Sytop Stellite Alloy (Brief Introduction and Application)

Sytop Company Is located in NO.35,xingnong Road,Shenbei District,Shenyang,China. It was established in 2002 it has been a professional Stellite Alloy manufacturer. Stellite Alloy sleeve are the advantaged products for us , we have produced more than thousands specifications and all of them are produced upon customer's drawing . Brief introduction as below : Material : Stellite –Grade 3.6.12 ,694, 20 etc. Process : Powder Metallurgy , it is short for PM and investment casting Hardness: 38-53 HRC Density : 8.4 g/cm ³ Size : Diameter 8-500mm and maxium length 700mm Properties : Wear and corrosion resistance, high temperature resistance Instructions : Drawing made upon cutomers request Usage : cooperate with other shaft and axle Tolerance control : turning or grinding surface , tolerance upon drawing Production lead time Samples 10 days , normal order 20-30 days Production capacity : 20,000pcs one month. Packag...
发表评论
阅读全文

Stellite Alloy 6 (Stellite 6) Biref Information

The professional Stellite Alloy manufacturer - Shenyang Top New Material Co.,Ltd, since its inception in 2001, and after many years of development and growth, the company is now playing a leading role in stellite alloy manufacture industry in China. Stellite Alloy 6 is the most widely used cobalt base alloy and exhibits good all-round performance. It has excellent resistance to many forms of mechanical and chemical degradation over a wide temperature range, and retains a reasonable level of hardness. Particular attributes are its outstanding self-mated anti-galling properties (which result in its wide use as a valve seat material), its high temperature hardness, and a high resistance to impact and cavitation erosion. The alloy is ideally suited to a variety of hardfacing processes. It has less tendency to crack than Stellite 12 in multiple layers, but is more wear resistant in abrasion and metal-to-metal or galling conditions. It can be turned with carbide tooling. ...
发表评论
阅读全文